The solution for optimally attaching cycling computers to aerobars: The TT Race Computer Mount from 76 Projects, now in the improved version 3.0.
News include:
- Now including no-turn insert for Garmin or Wahoo computers. This allows the computer to fit between narrow extensions without rotation. Please select the correct version when ordering. Advantage: When changing the system (Garmin and Wahoo are aligned differently) you can turn the insert by 90 degrees with a screw, and it will then also fit the other standard.
- An adapter with a GoPro standard can be attached from below, to which you can mount a camera, an aerometer like Notio and anything else that has the same mount. My tip for years at this point: light. This insert is now clicked in and no longer needs to be screwed in.
These tried and tested features have all remained, so in my opinion there is currently no better holder for the computer on the aero bar:
- Thanks to its modular design, it can be adjusted to extension distances of 50 to 90 millimeters, regardless of whether they are adjusted parallel or angled.
- If necessary, you can also adjust the holder's viewing angle to the driver in order to be able to read the computer optimally and without reflection.
- The real highlight of the whole thing: With no other mount you can get the computer further into the front of your field of vision. This is good because, firstly, you can always keep an eye on the road and secondly, the tail of the aero helmet is not pointing straight up when you have to look down at the computer that is too far back. The computer follows the gaze, not the other way around. See also the graphic.
The holder comes including all small parts. There are assembly tips here in the video. You can find all the options including an exploded view in detail here, the model fits almost always. But be careful: Due to its design, this holder does not fit mono-beam-cockpits like the 2021 Canyon Speedmax CF, Cervélo's P5 Disc in the very first version with the fork-like tip or the TFE handlebars from Vision. But this mount is one of the few that perfectly completes the ASC 43 extensions from Profile Design, here too mounted at the front using an upside down holder, see the last picture.
The adapter for clipping on is also available here .
Attention, the majority of the small parts installed are not cross-compatible with previous models. And the maximum weight of the mounted electronics should not exceed 200 grams; there is also quite a bit of leverage at the front, which tends to cause heavy things to fall off.
Manufacturer information according to GPSR:
Herstellerangaben gemäß GPSR:
Der Baranski Distribution und Onlinehandel UG (haftungsbeschränkt)
Rotdornweg 39
21224 Rosengarten